x_list

NAME
SYNOPSIS
DESCRIPTION
SEE ALSO
REFERENCES

NAME

x_list − Extract Cross-Over Information from the Data Base.

SYNOPSIS

x_list [ leg1 ] [ leg2 ] [ dataflags ] [ −Rwest/east/south/north ] [ −Xxbase ] [ −H ] [ −I ] [ −V ] [ −Ccorrfile ] [ −Zignorefile ]

DESCRIPTION

x_list will allow the user to extract information from the xx_base.b and xx_legs.b files. Several options can be passed on the command line in order to specify which parameters to extract. They are:

leg1 leg2

If two legs are specified, the cross-overs they have in common are returned. If one leg is specified, all the external cross-overs involving this leg are returned, OR only its internal cross-overs if −I is selected. If no legs are given, all the external (or internal with −I) cross-overs are returned. This program is useful if one wants to look at, say, gravity COEs versus time from port for a particular leg, etc.

dataflags

This is a string of any combination of the following:
l
means list both legnames.
t
means list time.
x
means list longitude.
y
means list latitude.
g
means list gravity COEs.
m
means list magnetics COEs.
b
means list bathymetry COEs.
G
means list average gravity at cross-over.
M
means list average magnetic anomaly at cross-over.
B
means list average bathymetry at cross-over.
h
means list heading of ship at cross-over.
The components are written out in the order they appear in dataflags. The default output is −txygmbGMBhl. When internal COEs are desired, the time reported is the elapsed time since the ship first occupied the cross-over point. For external COEs the time means time from the start of the year in seconds.

−R

Only return cross-overs inside the specified region west, east, south, and north. [Default is world].

−X

Indicate alternate xx_base.b file.

−H

Issue one header record on output.

−I

Report on internal COEs [Default is external COEs].

−C

Apply cross-over correction to the data (i.e. reports the cross-over value after the best-fitting corrections have been applied to both legs). If no corrfile is given, the default correction file is assumed.

−Z

Ignore those legs that appear in the ignorefile.

−V

Operate in verbose mode.

SEE ALSO

GMT(l), x_system(l)

REFERENCES

Wessel, P. XOVER: A Cross-over Error Detector for Track Data, Computers & Geosciences, 15, 333-346.